Wind Speed & Direction Sensors - 2-Axis |
|
Gill 2-Axis Wind Speed & Direction Sensors include the WindSonic and WindObserver ranges. All Gill 2-Axis wind speed and direction sensors use the ultrasonic time-of-flight principle to monitor wind speed and direction, with no moving sensor parts.
All Gill 2-axis wind speed and direction sensors are shown below with basic product specification information. Please select a product to view further details, specifications and literature. If you are unsure which wind speed and direction sensor is best suited to your application please view our wind speed and direction sensor comparison chart or contact us to discuss your requirements. |
WindSonic Wind Speed & Direction Sensor |

|
- - 2-axis anemometer providing wind speed and direction data
- - 0-60m/s wind speed measurement
- - 0-359º wind direction range (no dead band)
- - Free WindCom data logging software
- - Lightweight (0.5kg) and robust, corrosion free polycarbonate exterior
- - Low cost alternative to conventional cup and vane
or propeller wind sensors
View the WindSonic Wind Speed & Direction Sensor >
|
WindObserver Wind Speed & Direction Sensor Range |
|

|
- - 0-65m/s (0-145mph) wind speed
- - 0-359º wind direction range (no dead band)
- - Lloyd's Type Approval
- - Optional de-icing system
- - Free WindCom data logging software
- - Robust stainless-steel Construction
View the WindObserver II Wind Speed & Direction Sensor >
|
|
|
|

|
- - Ideal for Wind Turbine Applications
- - Speed accuracy for turbine control ±1% within ±25º of datum
- - Direction accuracy for turbine control ±1% within ±25º of datum
- - 0-75m/s (0-168mph) wind speed
- - 0-359º wind direction range (no dead band)
- - Heating Power 7A @ 24VAC or DC (1W/cm²)
- - Calibration traceable to NAMAS standards
- - Free WindCom data logging software
- - Robust stainless-steel Construction
View the Extreme Weather WindObserver >
|
|
|
|

|
- - Accepted by FAA and CAA as part of an AWOS
- - 0-70m/s (0-168mph) wind speed
- - 0-359º wind direction range (no dead band)
- - Heating Power 7A @ 24VAC or DC (1W/cm²)
- - Calibration traceable to NAMAS standards
- - Free WindCom data logging software
- - Robust stainless-steel Construction
View the Aviation Standard WindObserver >
|
|
|
|

|
- - ATEX Approved
- - No onshore maintenance required
- - 0-75m/s (0-168mph) wind speed
- - 0-359º wind direction range (no dead band)
- - Free WindCom data logging software
- - Robust stainless-steel Construction
View the Intrinsically Safe WindObserver >
|
|
|
|

|
- - 2-axis anemometers providing wind speed and direction data
- - 0-65m/s and 0-75m/s wind speed models available
- - 0-359º wind direction range (no dead band)
- - Free WindCom data logging software
- - Robust stainless-steel casing
- - Optional de-icing system
- - Sonic temperature output
View the Naval WindObserver >
|
|