FM40 Ignition Coil
Gill Instruments FM40 coils are a low cost solution for smaller spark ignited engines and are particularly suited for normally aspirated, stoichiometric fuelled gas engines up to approximately 1.5 litres (90 cubic inches) per cylinder.
They are designed to function with Gill Instruments inductive igniters providing the long programmable spark duration required for clean burning internal combustion engines.
|
 |
| Primary resistance |
0.75ohms nominal |
| Primary inductance |
3.5mH |
| Peak current |
7.5A at max dwell |
| Typical Spark Duration |
750µs (at nominal dwell) |
| Spark energy |
>40mJ (at nominal dwell) |
| Secondary voltage |
30kV max |
| LT Connections |
6.35mm spade terminals (FM40S)
(LT polarity must be observed)
Deutch connector (FM40D) |
| HT Connections |
SAE post |
|
|
 |
FM40S with spade terminal |
 |
FM40D with Deutch connector |
|